系统网站界面设计,中文wordpress工具箱,那个网站可以做攻略,兰州网站运营这种模式只做负载分担#xff0c;不能是主备备份#xff0c;因为主备备份模式下#xff0c;备设备会把vlan down掉#xff0c;如果是主备备份模式#xff0c;那在主挂后#xff0c;备的状态在切换过程中先起vlan#xff0c;再建立ospf邻接#xff0c;那业务会断线较久不能是主备备份因为主备备份模式下备设备会把vlan down掉如果是主备备份模式那在主挂后备的状态在切换过程中先起vlan再建立ospf邻接那业务会断线较久不推荐这样做。
FW1 hrp enable hrp interface GigabitEthernet1/0/2 remote 172.16.0.2
vlan 2 port g1/0/0 prot g1/0/1 hrp track action hrp track standby
interface GigabitEthernet1/0/2 undo shutdown ip address 172.16.0.1 255.255.255.0
firewall zone trust set priority 85 add interface GigabitEthernet0/0/0 add interface GigabitEthernet1/0/1
firewall zone untrust set priority 5 add interface GigabitEthernet1/0/0
firewall zone dmz set priority 50 add interface GigabitEthernet1/0/2
security-policy //暂时全允许 default action permit
FW2:
hrp enable hrp interface GigabitEthernet1/0/2 remote 172.16.0.1
vlan 2 port g1/0/0 prot g1/0/1 hrp track standby hrp track action
interface GigabitEthernet1/0/2 undo shutdown ip address 172.16.0.2 255.255.255.0
firewall zone trust set priority 85 add interface GigabitEthernet0/0/0 add interface GigabitEthernet1/0/1
firewall zone untrust set priority 5 add interface GigabitEthernet1/0/0
firewall zone dmz set priority 50 add interface GigabitEthernet1/0/2
security-policy default action permit
查看 dis hrp state ver
