c 多语言网站怎么做,好三网网站,做土建资料有什么网站没,模具 东莞网站建设之前做过几次公网推流的尝试, 今天试了UDP推到公网, 再用TCP从公网拉下来, 发现不行, 就直接改用TCP转TCP了. 中间中转使用的python脚本, 感谢GPT提供技术支持:
import socket
import threadingdef tcp_receiver(port, forward_queue):接收TCP数据并将其放入…之前做过几次公网推流的尝试, 今天试了UDP推到公网, 再用TCP从公网拉下来, 发现不行, 就直接改用TCP转TCP了. 中间中转使用的python脚本, 感谢GPT提供技术支持:
import socket
import threadingdef tcp_receiver(port, forward_queue):接收TCP数据并将其放入队列receiver_socket socket.socket(socket.AF_INET, socket.SOCK_STREAM)receiver_socket.bind((, port))receiver_socket.listen(1)print(fTCP receiver ready on port {port})while True:client_socket, addr receiver_socket.accept()print(fConnected by {addr} for receiving data on port {port})try:while True:data client_socket.recv(1024)if not data:breakforward_queue.put(data)finally:client_socket.close()print(fReceiver connection closed by {addr})def tcp_forwarder(port, forward_queue):从队列中获取数据并转发到另一个TCP连接forwarder_socket socket.socket(socket.AF_INET, socket.SOCK_STREAM)forwarder_socket.bind((, port))forwarder_socket.listen(1)print(fTCP forwarder ready on port {port})while True:client_socket, addr forwarder_socket.accept()print(fConnected by {addr} for forwarding data on port {port})try:while True:data forward_queue.get() # This blocks until data is availabletry:client_socket.sendall(data)except socket.error:print(Failed to send data, discarding packet)break # End connection if sending failsfinally:client_socket.close()print(fForwarder connection closed by {addr})if __name__ __main__:from queue import Queuedata_queue Queue()receiver_thread threading.Thread(targettcp_receiver, args(9998, data_queue))forwarder_thread threading.Thread(targettcp_forwarder, args(9997, data_queue))receiver_thread.start()forwarder_thread.start()
就是从9998端口转发数据到9997端口, 下一步就用nginx做这个好了. 不用脚本了.
rtsp的部分, 源码在下面:
https://github.com/MontaukLaw/1126_rtsp
基于官方的vi_venc_rtsp sample code, 将rtsp的部分改成直接往公网推.
播放流依然是老办法:
ffplay -i tcp://wan_ip:9997因为我不需要缓存, 所以之前用ZLMedia转的方法, 一直会导致延迟慢慢变大, 可能是缓存的关系. 目前, 1126使用的WiFi连接的Internet, 延迟大约在1秒左右 带宽2Mbps 每秒数据约 250KB: 下一步就是使用4G网络推推看了…
