站长工具seo词语排名,制作网站的固定成本,什么叫网站优化,创建全国文明城市标语1、安装虚拟机、新建虚拟机 磁盘大小分配20G应该就够了。 2、安装Ubuntu 新建的虚拟机下插入iso镜像#xff0c;启动虚拟机安装Ubuntu。安装完后将iso镜像弹出、重启。
3、安装vmtools及其他补丁 虚拟机安装installvmtools#xff0c;将打开的文件拷贝到/tmp临时文件夹中启动虚拟机安装Ubuntu。安装完后将iso镜像弹出、重启。
3、安装vmtools及其他补丁 虚拟机安装installvmtools将打开的文件拷贝到/tmp临时文件夹中解压缩并安装./vmware-install.pl完成后重启。 重启后升级 Ububtuapt-getupdate 安装vi编辑器apt-getinstall vim 安装tftpd-hpaapt-getinstall tftpd-hpa //tftp 安装flexapt-getinstall flex //makesysall编译过程中用到 安装mkcramfsapt-getinstall mkcramfs //建立文件系统 安装libncurses5-devsudoapt-get install libncurses5-dev //make menuconfig需要
4、修改通过root用户登录。安装vsftpd。参考另外文章
5、安装目标Linux sudomkdir /camera/mv_pro_5.0 cd/home/ss chmod777 mvl_5_0_0_demo_lsp_setuplinux_02_10_00_14.bin chmod777 mvl_5_0_0801921_demo_sys_setuplinux.bin ./mvl_5_0_#_demo_sys_setuplinux.bin 安装目录设为/camera/mv_pro_5.0 ./mvl_5_0_0_demo_lsp_setuplinux_#_#_#_#.bin 安装目录设为/camera/mv_pro_5.0 转到/opt/mv_pro_5.0解压里面的两个文件 sudotar -zxvf mvltools5_0_0801921_update.tar.gz 解压要几分钟 时间 sudotar -zxvf DaVinciLSP_02_10_00_14.tar.gz
6、安装DVSDK软件包 先给权限chmod。 ./dvsdk_setuplinux_2_10_01_18.bin 安装在/camera/ss/dvsdk_2_10_01_18 ./xdctools_setuplinux_3_15_01_59.bin 安装在/camera/ss/dvsdk_2_10_01_18/xdctools_3_15_01_59 ./psp_#_#_#_#.bin 安装在/camera/ss/dvsdk_2_10_01_18/ host$ tar -zxvf psp_#_#_#_#.tar.gz 完了删除安装文件。 打补丁将dvsdk_2_10_00_16_patch.tgz解压在dvsdk下。
为主机设置工作环境 cd~/dvsdk_2_10_01_18 viRules.make 检查其中的设置确保和实际路径相符如
DEMO_INSTALL_DIR$(DVSDK_INSTALL_DIR)/dvsdk_demos_2_10_00_17
7、安装NFS文件系统 安装NFS服务包 sudoapt-get install nfs-kernel-server 配置文件 sudogedit /etc/exports 加入下面一 行 /camera/ss/ipnc/target/filesys*(rw,no_root_squash,no_all_squash,sync) 激活后重启 NFS服务 sudo/usr/sbin/exportfs -av sudo/etc/init.d/nfs-kernel-server restart 查看防火墙状态 sudoiptables status 关防火墙 sudoiptables -F
10、建立开发环境 Vi/root/.bashrc 最好在普通用户和Root用户都建立 在最后加入下 面命名
export PATH/camera/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin:/camera/mv_pro_5.0/montavista/pro/bin:/camera/mv_pro_5.0/montavista/common/bin:$PATH 运行 source~/.bashrc 使环境变量生 效。 在命名行输入 arm[tab]会出现交叉编译工具。 rootss-desktop:/camera/ss/dvsdk_2_10_01_18#arm arm2hpdl arm_v5t_le-gprof arm_v5t_le-objcopy arm_v5t_le-addr2line arm_v5t_le-initdconfig arm_v5t_le-objdump arm_v5t_le-ar arm_v5t_le-ksymoops arm_v5t_le-prelink arm_v5t_le-as arm_v5t_le-ld arm_v5t_le-prelink-rtld arm_v5t_le-c arm_v5t_le-ldconfig arm_v5t_le-ranlib arm_v5t_le-cfilt arm_v5t_le-ldd arm_v5t_le-readelf arm_v5t_le-cpp arm_v5t_le-libindex arm_v5t_le-shellconfig arm_v5t_le-g arm_v5t_le-libopt arm_v5t_le-size arm_v5t_le-gcc arm_v5t_le-libtoolize arm_v5t_le-strings arm_v5t_le-gcov arm_v5t_le-nm arm_v5t_le-strip
11、安装LSP支持包
方法一 复制 MontaVistaLinux Support Package到工作目录中里面包含了Davinci的驱动。 cp-R/camera/mv_pro_5.0/montavista/pro/devkit/lsp/ti-davinci/linux-2.6.18_pro500/*/camera/ss/ipnc/ti-davinci/
方法二用此方法 将lsp_ipnc_dm36x_0.7.0.tgz复制到/camera/ss/ipnc/下解压生成ti-davinci文件夹。
12、建立文件系统文件夹 在/camera/ss/ipnc/下解压 ipnc_app_dm365_priv_0.7.0.tgz ipnc_app_dm365_open_0.7.0.tgz ipnc_app_dm365_aewb_0.7.0.tgz 修改/camera/ss/ipnc/下Rules.make的路径。 HOME: /camera/ss/ipnc DVSDK_BASE_DIR: /camera/ss/dvsdk_2_10_01_18 TFTP_HOME: /var/lib/tftpboot MVTOOL_DIR: /camera/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le TARGET_FS: $(HOME)/target/filesys KERNELDIR: $(HOME)/ti-davinci BASE_DIR: $(HOME)/av_capture/build 在/camera/ss/ipnc/下新建target在其下建立filesys、cramfs文件夹将cramfsImage_ipnc_dm365_0.7.0拷贝到target下。
rootss-desktop:/camera/ss/ipnc/target#ls cramfs cramfsImage_ipnc_dm365_0.7.0 filesys rootss-desktop:/camera/ss/ipnc/target# mount -o loop -tcramfs cramfsImage_ipnc_dm365_0.7.0cramfs/ rootss-desktop:/camera/ss/ipnc/target# ls cramfs/ bin etc lib mnt proc sbin tmp var dev init linuxrc opt root sys usr rootss-desktop:/camera/ss/ipnc/target# cp -av cramfs/*filesys/
13、然后可运行 rm-rf /camera/ss/ipnc/target/filesys/root/.esm*
rm-rf /camera/ss/ipnc/target/filesys/usr/local/etc/* make-s sysall rm-rf /camera/ss/ipnc/target/rdmnt
rm/camera/ss/ipnc/target/cramfsUby00 mkdir/camera/ss/ipnc/target/rdmnt
cp-av /camera/ss/ipnc/target/filesys/* /camera/ss/ipnc/target/rdmnt
sudomkcramfs /camera/ss/ipnc/target/rdmnt/camera/ss/ipnc/target/cramfsUby00 cp/camera/ss/ipnc/ti-davinci/arch/arm/boot/uImage /home/ss/uImageUby00
#/var/lib/tftpboot/uImage_00
cp/camera/ss/ipnc/target/cramfsUby00 /home/ss/cramfsUby00 还有 #make –s lsp //incrementally build LSP #make –s lspclean //clean all generated files in LSP #make –s lspall //cleanand rebuild all LSP #make –s dvsdk //incrementally buildDVSDK #make –s dvsdkclean //clean all generatedfiles in DVSDK #make –s dvsdkall //clean and rebuild all DVSDK #make –s //incrementally build AV server and IPNC APP #make –s clean //cleanall generated files in AV server and IPNC APP #make –s all //clean and rebuild all AV Server and IPNC APP #make –s sys //incrementally build LSP, DVSDK, AV server and IPNC APP #make –s sysclean //clean all generated files LSP, DVSDK, AV serverand IPNCAPP #make –s sysall //clean and rebuild all LSP, DVSDK, AVserver and IPNC APP http://processors.wiki.ti.com/index.php/GSG:_DM365_DVEVM_Software_Setup 原文地址http://www.awayblog.cn/article.asp?kinylei$_$c1b2d0a5b959c1fc9152eee5.html
