网络公司网站建设方案书,甘孜商城网站建设,黄金网站app软件下载安装免费,房产资讯什么网站做的好知识点#xff1a;什么是掌控板#xff1f; 掌控板是一块普及STEAM创客教育、人工智能教育、机器人编程教育的开源智能硬件。它集成ESP-32高性能双核芯片#xff0c;支持WiFi和蓝牙双模通信#xff0c;可作为物联网节点#xff0c;实现物联网应用。同时掌控板上集成了OLED…知识点什么是掌控板 掌控板是一块普及STEAM创客教育、人工智能教育、机器人编程教育的开源智能硬件。它集成ESP-32高性能双核芯片支持WiFi和蓝牙双模通信可作为物联网节点实现物联网应用。同时掌控板上集成了OLED显示屏、RGB灯、加速度计、麦克风、光线传感器、蜂鸣器、按键开关、触摸开关、金手指外部拓展接口支持图形化及MicroPython代码编程可实现智能机器人、创客智造作品等智能控制类应用。 掌控板硬件特性: ESP-32主控 处理器Tensilica LX6双核处理器一核处理高速连接一核独立应用开发 主频高达240MHz的时钟频率 SRAM520KB Flash8MB Wi-Fi标准FCC/CE/TELEC/KCC Wi-Fi协议802.11 b/g/n/d/e/i/k/r (802.11n速度高达150 Mbps)A-MPDU和A-MSDU聚合支持0.4us防护间隔 频率范围2.4~2.5 GHz 蓝牙协议符合蓝牙v4.2 BR/EDR和BLE标准 蓝牙音频CVSD和SBC音频低功耗10uA 供电方式Micro USB供电 工作电压3.3V 最大工作电流:200mA 最大负载电流:1000mA 掌控板载 三轴加速度计MSA300,测量范围:±2/4/8/16G 地磁传感器MMC5983MA,测量范围:±8 Gauss;精度0.4mGz,电子罗盘误差±0.5° 光线传感器 麦克风 3 颗全彩ws2812灯珠 1.3英寸OLED显示屏支持16*16字符显示分辨率128x64 无源蜂鸣器 支持2个物理按键(A/B)、6个触摸按键 支持1路鳄鱼夹接口可方便接入各种阻性传感器 拓展接口 20通道数字I/O (其中支持12路PWM6路触摸输入) 5通道12bit模拟输入ADCP0~P4 1路的外部输入鳄鱼夹接口:EXT/GND 支持I2C、UART、SPI通讯协议 7、6个触摸按键控制RGB灯并显示按键名
#MicroPython动手做17——掌控板之触摸引脚
#6个触摸按键控制RGB灯并显示按键名from mpython import *from machine import Timerimport time_status_p _status_y _status_t _status_h _status_o _status_n 0
def on_touchpad_P_pressed():pass
def on_touchpad_P_unpressed():pass
def on_touchpad_Y_pressed():pass
def on_touchpad_Y_unpressed():pass
def on_touchpad_T_pressed():pass
def on_touchpad_T_unpressed():pass
def on_touchpad_H_pressed():pass
def on_touchpad_H_unpressed():pass
def on_touchpad_O_pressed():pass
def on_touchpad_O_unpressed():pass
def on_touchpad_N_pressed():pass
def on_touchpad_N_unpressed():passtim12 Timer(12)def timer12_tick(_):global _status_p, _status_y, _status_t, _status_h, _status_o, _status_ntry:touchPad_P.read();passexcept:returnif touchPad_P.read() 400:if 1 ! _status_p:_status_p 1;on_touchpad_P_pressed()elif 0 ! _status_p:_status_p 0;on_touchpad_P_unpressed()if touchPad_Y.read() 400:if 1 ! _status_y:_status_y 1;on_touchpad_Y_pressed()elif 0 ! _status_y:_status_y 0;on_touchpad_Y_unpressed()if touchPad_T.read() 400:if 1 ! _status_t:_status_t 1;on_touchpad_T_pressed()elif 0 ! _status_t:_status_t 0;on_touchpad_T_unpressed()if touchPad_H.read() 400:if 1 ! _status_h:_status_h 1;on_touchpad_H_pressed()elif 0 ! _status_h:_status_h 0;on_touchpad_H_unpressed()if touchPad_O.read() 400:if 1 ! _status_o:_status_o 1;on_touchpad_O_pressed()elif 0 ! _status_o:_status_o 0;on_touchpad_O_unpressed()if touchPad_N.read() 400:if 1 ! _status_n:_status_n 1;on_touchpad_N_pressed()elif 0 ! _status_n:_status_n 0;on_touchpad_N_unpressed()tim12.init(period100, modeTimer.PERIODIC, callbacktimer12_tick)def on_touchpad_P_pressed():global ioled.fill(0)oled.DispChar(P, 60, 22, 1)oled.show()rgb[0] (int(255), int(0), int(0))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)def on_touchpad_H_pressed():global ioled.fill(0)oled.DispChar(H, 60, 22, 1)oled.show()rgb[0] (int(255), int(102), int(0))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)def on_touchpad_Y_pressed():global ioled.fill(0)oled.DispChar(Y, 60, 22, 1)oled.show()rgb[1] (int(0), int(153), int(0))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)def on_touchpad_O_pressed():global ioled.fill(0)oled.DispChar(O, 60, 22, 1)oled.show()rgb[0] (int(255), int(102), int(0))rgb.write()time.sleep_ms(1)rgb[1] (int(255), int(102), int(0))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)def on_touchpad_T_pressed():global ioled.fill(0)oled.DispChar(T, 60, 22, 1)oled.show()rgb[2] (int(51), int(51), int(255))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)def on_touchpad_N_pressed():global ioled.fill(0)oled.DispChar(N, 60, 22, 1)oled.show()rgb.fill((int(255), int(102), int(0)))rgb.write()time.sleep_ms(1)time.sleep(1)rgb.fill( (0, 0, 0) )rgb.write()time.sleep_ms(1)mPython 图形编程
8、简易触摸按键电子琴6键 #MicroPython动手做17——掌控板之触摸引脚
#简易触摸按键电子琴6键from mpython import *import music
while True:music.stop()if touchPad_P.read() 400:music.pitch(262, 500)else:if touchPad_Y.read() 400:music.pitch(294, 500)else:if touchPad_T.read() 400:music.pitch(330, 500)else:if touchPad_H.read() 400:music.pitch(349, 500)else:if touchPad_O.read() 400:music.pitch(392, 500)else:if touchPad_N.read() 400:music.pitch(440, 500)
mPython 图形编程
视频掌控板模拟简易触摸按键电子琴6键
https://v.youku.com/v_show/id_XNDY0ODEwMjcxMg.html?spma2hbt.13141534.app.55!25!2555!255!25!25!255A
9、触摸按键点播六首曲子
#MicroPython动手做17——掌控板之触摸引脚
# 触摸按键点播六首曲子from mpython import *
import time
import music
from machine import Timerdef on_button_a_down(_):time.sleep_ms(10)if button_a.value() 1: returnmusic.stop()_status_p _status_y _status_t _status_h _status_o _status_n 0
def on_touchpad_P_pressed():pass
def on_touchpad_P_unpressed():pass
def on_touchpad_Y_pressed():pass
def on_touchpad_Y_unpressed():pass
def on_touchpad_T_pressed():pass
def on_touchpad_T_unpressed():pass
def on_touchpad_H_pressed():pass
def on_touchpad_H_unpressed():pass
def on_touchpad_O_pressed():pass
def on_touchpad_O_unpressed():pass
def on_touchpad_N_pressed():pass
def on_touchpad_N_unpressed():passtim12 Timer(12)def timer12_tick(_):global _status_p, _status_y, _status_t, _status_h, _status_o, _status_ntry:touchPad_P.read();passexcept:returnif touchPad_P.read() 400:if 1 ! _status_p:_status_p 1;on_touchpad_P_pressed()elif 0 ! _status_p:_status_p 0;on_touchpad_P_unpressed()if touchPad_Y.read() 400:if 1 ! _status_y:_status_y 1;on_touchpad_Y_pressed()elif 0 ! _status_y:_status_y 0;on_touchpad_Y_unpressed()if touchPad_T.read() 400:if 1 ! _status_t:_status_t 1;on_touchpad_T_pressed()elif 0 ! _status_t:_status_t 0;on_touchpad_T_unpressed()if touchPad_H.read() 400:if 1 ! _status_h:_status_h 1;on_touchpad_H_pressed()elif 0 ! _status_h:_status_h 0;on_touchpad_H_unpressed()if touchPad_O.read() 400:if 1 ! _status_o:_status_o 1;on_touchpad_O_pressed()elif 0 ! _status_o:_status_o 0;on_touchpad_O_unpressed()if touchPad_N.read() 400:if 1 ! _status_n:_status_n 1;on_touchpad_N_pressed()elif 0 ! _status_n:_status_n 0;on_touchpad_N_unpressed()tim12.init(period100, modeTimer.PERIODIC, callbacktimer12_tick)def on_touchpad_P_pressed():music.play(music.DONG_FANG_HONG, waitFalse, loopFalse)def on_touchpad_Y_pressed():music.play(music.BIRTHDAY, waitFalse, loopFalse)def on_touchpad_T_pressed():music.play(music.MO_LI_HUA, waitFalse, loopFalse)def on_touchpad_H_pressed():music.play(music.ODE, waitFalse, loopFalse)def on_touchpad_O_pressed():music.play(music.PRELUDE, waitFalse, loopFalse)def on_touchpad_N_pressed():music.play(music.CAI_YUN_ZHUI_YUE, waitFalse, loopFalse)button_a.irq(triggerPin.IRQ_FALLING, handleron_button_a_down)while True:oled.fill(0)oled.DispChar(A键停止, 35, 0, 1)oled.DispChar(P:东方红 Y:生日快乐, 6, 20, 1)oled.DispChar(T:茉莉花 H:欢乐颂, 11, 35, 1)oled.DispChar(O:婚宴 N:彩云追月, 13, 50, 1)oled.show()mPython X 图形编程
视频触摸按键点播六首曲子
https://v.youku.com/v_show/id_XNDY1Mzc0MTc0OA.html?spma2h0c.8166622.PhoneSokuUgc_1.dtitle 10、六个触摸键控制的RGB颜色灯
#MicroPython动手做17——掌控板之触摸引脚
#六个触摸键控制的RGB颜色灯from mpython import *
import network
import time
import music
from yeelight import *
from machine import Timermy_wifi wifi()my_wifi.connectWiFi(zh, zy1567)_status_p _status_y _status_t _status_h _status_o _status_n 0
def on_touchpad_P_pressed():pass
def on_touchpad_P_unpressed():pass
def on_touchpad_Y_pressed():pass
def on_touchpad_Y_unpressed():pass
def on_touchpad_T_pressed():pass
def on_touchpad_T_unpressed():pass
def on_touchpad_H_pressed():pass
def on_touchpad_H_unpressed():pass
def on_touchpad_O_pressed():pass
def on_touchpad_O_unpressed():pass
def on_touchpad_N_pressed():pass
def on_touchpad_N_unpressed():passtim12 Timer(12)def timer12_tick(_):global _status_p, _status_y, _status_t, _status_h, _status_o, _status_ntry:touchPad_P.read();passexcept:returnif touchPad_P.read() 400:if 1 ! _status_p:_status_p 1;on_touchpad_P_pressed()elif 0 ! _status_p:_status_p 0;on_touchpad_P_unpressed()if touchPad_Y.read() 400:if 1 ! _status_y:_status_y 1;on_touchpad_Y_pressed()elif 0 ! _status_y:_status_y 0;on_touchpad_Y_unpressed()if touchPad_T.read() 400:if 1 ! _status_t:_status_t 1;on_touchpad_T_pressed()elif 0 ! _status_t:_status_t 0;on_touchpad_T_unpressed()if touchPad_H.read() 400:if 1 ! _status_h:_status_h 1;on_touchpad_H_pressed()elif 0 ! _status_h:_status_h 0;on_touchpad_H_unpressed()if touchPad_O.read() 400:if 1 ! _status_o:_status_o 1;on_touchpad_O_pressed()elif 0 ! _status_o:_status_o 0;on_touchpad_O_unpressed()if touchPad_N.read() 400:if 1 ! _status_n:_status_n 1;on_touchpad_N_pressed()elif 0 ! _status_n:_status_n 0;on_touchpad_N_unpressed()tim12.init(period100, modeTimer.PERIODIC, callbacktimer12_tick)def on_touchpad_P_pressed():global itime.sleep_ms(500)bulb.set_rgb(153, 0, 0)oled.DispChar(P键 红色, 38, 32, 1)oled.show()rgb.fill((int(153), int(0), int(0)))rgb.write()time.sleep_ms(1)def on_touchpad_Y_pressed():global itime.sleep_ms(500)bulb.set_rgb(0, 153, 0)oled.DispChar(Y键 绿色, 38, 32, 1)oled.show()rgb.fill((int(0), int(153), int(0)))rgb.write()time.sleep_ms(1)def on_touchpad_T_pressed():global itime.sleep_ms(500)bulb.set_rgb(51, 51, 255)oled.DispChar(T键 蓝色, 38, 32, 1)oled.show()rgb.fill((int(51), int(51), int(255)))rgb.write()time.sleep_ms(1)def on_touchpad_H_pressed():global itime.sleep_ms(500)bulb.set_rgb(255, 102, 0)oled.DispChar(H键 橙色, 38, 32, 1)oled.show()rgb.fill((int(153), int(51), int(0)))rgb.write()time.sleep_ms(1)def on_touchpad_O_pressed():global itime.sleep_ms(500)bulb.set_rgb(204, 51, 204)oled.DispChar(O键 紫色, 38, 32, 1)oled.show()rgb.fill((int(102), int(51), int(102)))rgb.write()time.sleep_ms(1)def on_touchpad_N_pressed():global itime.sleep_ms(500)bulb.set_rgb(255, 204, 51)oled.DispChar(N键 黄色, 38, 32, 1)oled.show()rgb.fill((int(153), int(102), int(51)))rgb.write()time.sleep_ms(1)rgb[1] (int(51), int(51), int(51))
rgb.write()
time.sleep_ms(1)
music.play(G5:1)
bulb Bulb(discover_bulbs()[0][ip])
time.sleep_ms(500)
bulb.turn_on()
oled.fill(0)
oled.DispChar(触摸键控制RGB灯, 18, 16, 1)
oled.show()mPython X 实验图形编程
#MicroPython动手做17——掌控板之触摸引脚 #六个触摸键控制的RGB颜色灯实验视频
https://v.youku.com/v_show/id_XNDcwMTY3MzkxNg.html?spma2h0c.8166622.PhoneSokuUgc_1.dtitle 11、触摸不同按键点亮不同色RGB灯
from mpython import *while True:if(touchPad_P.read() 100):rgb[0] (255,0,0) # 开灯设置红色rgb[1] (255,0,0) # 设定为红色rgb[2] (255,0,0) # 设置为红色rgb.write()elif(touchPad_Y.read() 100):rgb[0] (0,255,0) #关灯rgb[1] (0,255,0)rgb[2] (0,255,0)rgb.write()elif(touchPad_T.read() 100):rgb[0] (0,0,255) #关灯rgb[1] (0,0,255)rgb[2] (0,0,255)rgb.write()elif(touchPad_H.read() 100):rgb[0] (255,255,0) #关灯rgb[1] (255,255,0)rgb[2] (255,255,0)rgb.write()elif(touchPad_O.read() 100):rgb[0] (255,0,255) #关灯rgb[1] (255,0,255)rgb[2] (255,0,255)rgb.write()elif(touchPad_N.read() 100):rgb[0] (0,255,255) #关灯rgb[1] (0,255,255)rgb[2] (0,255,255)rgb.write()
